# COMPLETE GUIDE: How To Calculate Number Of Blocks To Fence One Plot Of Land (100 by 50, no pillar)

When we talk about Fencing projects, I know someone would want to wonder why fencing is very important to us. Well, fence is very important as it helps secure your plot of land from encroachment. Now I am going to write on how you could easily calculate the number of Blocks Required to Fence a Plot Of land with ease.

On this current post, I’ll be using a plot measuring 100ft by 50ft but then, it’s all the same procedure except you’ve never been a fervent reader here.
So how do we calculate the number of blocks required to fence one plot of land?
From this Post, You will get to know:
The number of bags of cement needed for this project,
Amount of sharp sand that will be required as well as the
Number of trips of granite you’ll need

How To Calculate The Number Of Blocks To Fence One Plot Of Land

Before we start, lets understand The measurement we are using is 100 ft (length) and since we have two lengths that is multiply by 2 which is 200 ft. (10 x 2) = 200

The breadth is 50 ft and also since we have 2 breadths that equal 100 ft (50 x 2) = 100

Then (200 + 100) that is 300 feet perimeter line fencing.

The calculation For Number a of Blocks Goes Thus

(we are to convert this 300 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 300 ft which is 3600 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 3600 inches or 300 feet, we would need to divide 3600 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18 inches.

Now 3600 inches divided by 18 inches is approximately 200 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 200 multiplied by 9 which is 1800 blocks and that is all you need anything aside from this is fake and fraud.

Recommended:  Cost of Fencing a Plot of Land (100 by 100) with Pillars

Note: Its always recommended that you make an allowance by adding 10% of the total number of blocks to cater for breakages but you can still decide to work with just 1800 since I know we didn’t leave space for joints.

Now let’s consider other things
Now that we’ve known the number of blocks required to fence a plot of land, the next question would focus on ascertaining the number of bags of cement that would enable us bond the 1800 blocks calculated above.

HOW MANY BAGS OF CEMENT WOULD BE REQUIRED TO BOND THE 1800 BLOCKS?

In our normal English we call the act of bonding Setting of block

By standard, it is required that a bag of cement be used for 70 blocks (it could be lower if you’re using hollow blocks)

Therefore, for 1800 blocks, you’ll need 1800/70 = 25.71 bags of cement or approximately 26 bags of cement.

Note: This highly depends on the mix ratio used for mortar. Mix ratio could differ, it all depends on the engineer on site.

As For the number of Trips Of granite you’ll need, it all depends on what your pocket can carry.

While I recommend that granite be incorporated into the foundation concrete, it’s not compulsory that it be used. This of course depends on where you are, for a plot of land situated in a highly swampy area, casting is very compulsory, it may even be decided that reinforced concrete be used before introducing blocks.

Well, I hope I’ve been able to describe in details how to easily calculate the number of blocks required to fence your plot of land in Nigeria, especially for a 100 by 50ft plot.

Feel free to use the comment section to ask your questions. Do not forget

Recommended:  How To Calculate The Number Of Blocks Needed For Your Fence Project Measuring 100ft By 60ft

## Written by admin

Hi, I'm Okpese! It is my job to handle the content aspect of this great organization and I'm determined to ensure you get it all right as long as you're handling a construction project in Nigeria!

1. Quickly this site will indisputably be famous among all blogging people, because of its fastidious articles or reviews.

2. Wow this is beautiful.
More Grace to you

3. Dear Sir, what if the land is dry one, does iron rod needed for pillar fencing again? And how many trip of granite needed likewise.

Can you give us the cost price of all these items please. Thanks

4. Please use any of the contact details on the "Contact Page" to send the dkmensions of the piece of land under consideration

5. Hello, thanks for this valuable information. Is the number of blocks for pillars included in the 2119 please? Thank you.

• Awesome.
Thanks for the clear explanation

6. Please Sir can you calculate for me the amount of blocks and cement needed to fence 70/100 plot of land (8 feet high) which has 3 bedrooms built on the land.

• Hopefully it would be the same number of blocks if it was a 10 bedroom house or just 1 bedroom mansion…as long as the plot was only 70 X 100 at 8ft. High…

7. Very helpful.Thanks a million

8. Great piece. I find this very useful as it will sure help my planning. Thanks Mr. Nwachukwu.

9. Wow! Thumbs up guys. This is so comprehensive. Thanks so much for this article. This blog is dope.

10. Enter your comment…sir concerning 1acre of land, sir how many 6inch block will b needed to fence it up to 12coach

11. Nice one sir, very useful…but what of the blinding for the foundation of the fence?

12. If the 1 acre of land is 200 x 200 ft, then I'll need to work extra to get the number of blovks required

So confirm the dimension

13. At each corner, does it also requires a concrete with iron rods and d middle

14. Greetings. My Engr. I have a land measuring 200feet x 200feet to fence. With d calculation pattern u stated above,I have used it to get d total of blocks I needed, which is 2500 blocks and 40 bags of cement for bonding d blocks together. The ideal coaches or level is 4 coaches or levels. My question is, does it require a reinforced concrete plant at d middle of the line of each side of the land?

15. @Seysony
The use of Reinforced concrete on fence projects depends on a few factors

1. Location of Fence with reference to the road. If the fence is very close to a busy road, specially that plied by heavy duty trucks/Heavy vehicular traffic, then its highly recommended that you put a column at every 6th block

2. The nature of the soil: If the site is located on a plot with weak soil/peat or swampy area, you can use Columns also

3. Size of the Plot: This is where I think you need most. You mentioned 200 x 200. So if you're fencing this, I think you'll need to place columns at regular intervals. The gap between each column is something that must be decided by the site engineer considering factors 1 & 2 above.

However, if you have money, you can also use columns wherever you want it

Enjoy

16. Great job thanks for that.

17. Great, thanks engr it really means a lot to me.
Now I can estimate how much it will cost me to make a fence in my land

18. Thanks for the great work done. Please may I know the trip of sand that will be needed for the block sitting for 1575 blocks

19. Thanks for your detailed blogging. God bless you sir.

20. You're welcome sir. Thanks for finding time to read through

21. Please how many blocks will it take me to fence 7 plots of lands and bags of cements?

22. Can you please contact me with your survey plan so I can give an estimate with 101% accuracy? +2347035528329

23. 1800*7=12,600 blocks
26*7 =128 bags of cements

24. How many blocks will be required to fence 2 plots of land measuring 100ft by 60ft each, please? How many blocks will be required for the columns set at 6 blocks apart? Lastly, how many bags of cement are needed for bonding?
Thank you.

• Nice write up. I enjoyed reading your article. Thanks and keep it up.

25. Interesting

26. Hello there, great job with your calculations . It is very helpful. However, i wish to point out a fundamental point of note in your calculation. Your calculation was for a flat fence that had all for sides sealed. if you make a provision for a gate, then the width won't be 50×2 because the gate will take up a large chunk of the front wall. Great article sir.

27. Thanks for your enlightenment, it helped a lot

28. Thank you so much…I've gained a lot..

29. Cost of rods and qty of sand for mortal for a plot of land

30. It's not every fence that requires rod.

As for sand and mortar, check other posts under Fencing topic.

31. This is very informative

32. @seysony that's a long length and I will advice you introduce pillars maybe at each 10 blocks space

33. Introducing a pillar at 10 block span will leave a weak wall. Make a pillar every 6 blocks especially if the said plot is located close to a road way!

6 blocks will be strong but also ensure you consider the nature of the soil as some soil would require reinforcements due to weak or poor bearing capacity

34. How many blocks is required to complete a fence of 11coaches of 6plot of land including coloums and bags of cement

35. I APPRECIATE YOUR INFORMATION,BUT YOU SHOULD HAVE SPECIFY TO PEOPLE THAT ARE NOT IN THIS FILED THAT THERE WILL BE A MIDDLE REINFORCEMENT OR BLOCK PILLARS TO PARTITION THE FENCE WALL WHICH I BELIEVE WILL ADD MORE NUMBER OF BLOCKS OR CEMENT REQUIRED. ALSO THE FENCE NEED TO BE CHAIN IN ORDER TO AVOID CRACK THAT WILL DEVELOP WHEN THE SOIL SETTLE.

36. I was wowed reading this masterpiece. I got all the information I needed on this article.

May God almighty replenish ur knowledge. I gained a lot here. Thank you Sir.

37. Good PM bro, pls can I get the estimate of fencing a 120 by 50 plot of land I try getting what it will cost me but can't figure it out. And the cost my engineer gave me is outrageous. Thanks

38. Your information is very useful. God bless you.

39. You can easily reach me with the contact details on contact us page.
Once you contact me, I'll give an estimate depending on the number of coaches you want your wall to be

40. Thanks so much. I find this article timely, helpful and informative.

41. Thanks for your generosity. Your piece is most helpful. May God reward you.

42. Good day Mr Richard, pls how can you calculate the number of blocks for a fencing that have block pillars? How can you calculate the number of blocks in each block pillars? Thanks

43. Good day Mr Richard, pls how can you calculate the number of blocks for a fencing that have block pillars? How can you calculate the number of blocks in each block pillars? Thanks

44. Good sir well done for that great calculation you made
But then I do oberserve that when u are doing your convertion from feet (ft) in to inches you used 12 , but. I think it should be 25.4 which will give on inches not 12

45. So grateful for this. Thumbs up

46. Thank you so much I really appreciate your time to explain all this in detail it's going to help alot.

47. Very helpful information

48. Great information very accurate and precise

49. That's a very good idea

50. From Ghana. I appreciate this..
I am walling my one hector plot. Great tip

51. Thanks for that information sir

52. Sir. I used the calculations methond mentioned above to calculate for 132 ft by 82.5 and I got 4290 blocks and 61 bags of cement, but I am finding it difficult to calacut the cement and crush stones.

53. Crush stones for foundation you mean? If yes, there is another content for that, respond let me link you to it sir

54. Am stephen in kenya I have found this very helpful ,now that am looking forward meeting my client for the same plot measuring 100x50ft ,I have the idea and knowledge .be blessed much regards

55. 100×80 feet fence and I want to know how many blocks can build

56. Am stephen in kenya I have found this very helpful ,now that am looking forward meeting my client for the same plot measuring 100x50ft ,I have the idea and knowledge .be blessed much regards

57. Kindly link me to same pls

58. Why 1.54 material factor as not used to calculate for volume of shand and gravel

59. A good post. I’m glad I saw this. I now have an estimate for doing perimeter fencing for my land.

God bless you.

• Thanks for dropping by

60. Please how many numbers of 5″ blocks do I need to fence a land measuring 612.012 square meters including pillars @ 6 blocks

61. How brick required to fence 20 by 20 plot 6ft tall

• 20 by 20 plot? please if you’d want us to assist you, kindly provide a survey plan of your plot of land as we work with accurate dimensions to prevent errors!