*--Avertisements--*

*--Avertisements--*

Welcome to yet another wonderful edition on www.guardianconstructions.com. On today’s edition, we are going to be learning a very simple but very important topic for every Building Contractor out there. We will be learning

**…***How to Calculate the number of square meters in one packet of floor tile*

I chose this topic because it will enable you as an estimator know the quantity of tiles to buy for a particular project provided you have taken off properly and obtained the total area to be tiled.

*--Avertisements--*

*--Avertisements--*

Before we do this properly, let us first know the dimension of tiles an the number of quantities in every packet of tile you purchase

### Tile Dimension Available in Nigerian Market

In Nigeria tile market, you will find tiles in the following Dimensions

300 x 300

300 x 600

400 x 400

400 x 250

600 x 600

Note: All Dimension are in Millimeter (mm)

### How Many Piece of tiles exist in one packet?

Having known the dimensions of tiles available in the market, let us now consider the quantity of tiles in each carton/Packet. I will recommend you know the number of tiles in every packet you buy as this will enable you calculate correctly the number of square meters it can cover

**For a packet of 300 x 300 tiles, there are 17 pieces**

**For a packet of 400 x 400 tiles, there are 12 pieces**

**For a packet of 400 x 250 tiles, there are 15 pieces**

**For a packet of 600 x 600 tiles, there are 5 pieces**

Now we know how many pieces of tiles exists in a carton

Next, lets Calculate the number of square meters exists in a packet of floor tile purchased from a supplier.

### How Many Square Meters Exists in 1 packet of floor tiles?

Now that we have been able to determine the number of tiles on every packet, it is now easy to estimate the number of square meters that can be covered by a packet.

In order to estimate the number of square meters in a packet of tile, we must know the surface area of each tile that makes up the packet and then multiply by the total number of tiles in the packet.

Its that simple…

Therefore, lets calculate the total area of each piece of tile and match this using the total number of tiles in a packet.

**For a packet of 300 x 300 tiles, there are 17 pieces**

**This gives us: 300 x 300 x 17 = 1.53m**

^{2}

**For a packet of 400 x 400 tiles, there are 12 pieces**

**This gives us: 400 x 400 x 12 = 1.92m**

^{2}

**For a packet of 400 x 250 tiles, there are 15 pieces**

**This gives us: 400 x 250 x 15 = 1.5m**

^{2}

**For a packet of 600 x 600 tiles, there are 4 pieces**

**This gives us: 600 x 600 x 4 = 1.44m**

^{2}

Now that you have known the total square meters in every packet of tile out there in the market, all you have to do is divide the value given to you by an estimator by the corresponding value on this page.

If you do this, you will be able to know the number of packets of tiles to buy for your tiling project without wasting much resources!

*--Avertisements--*

*--Avertisements--*

Thanks very much ��

Awesome! God bless you richly for giving us insight to this. I really appreciate.

You're welcome

Nigerian 60×60 are usually 4 pieces or 3 pieces which should be 60×60×4=1.44sm or 60×60×3=1.08sm

You rarely see 5 pieces unless some nigerian made spanish designed tiles.

Thanks for the reminder sir. This means a lot to Us

GOD bless you

Good job done

Can I use same calculation to calculate 60&60 and 60&120 tiles and how many pieces are in 60&120 carton tiles.

Thanks so much sir,I am going into tiles business.

Congratulations on that sir. It's very lucrative

Yes you can. Just pay attention. It's self explanatory

Thanks sir ..i appreciate..please what about 500×500

How much is a carton of 400×400?

Good one bros, I'm a tiller.u'r correct.

How many is 80 carton in pa square of 40×40

If I have 16 tiles as length and 16 tiles as width. Please how do I calculate the total area

It was very educating

This so mean a lot to me, kudos to you