Today we would love to make it easy for those on site thinking about How many wheelbarrows of sand, granite and bags of cement makes up 1 cubic meter (1m³) of Concrete. This is going to be very useful because i am also going to let you know the value of one Head Pan. This is very important because i know that here in Nigeria where i am from, many construction sites cannot afford the cost of renting a Mixer, thus, they make use of manual labor which means laborers will be made to carry head pans or wheel barrows filled with sand in order to achieve the day’s task.
What is the Volume of a head pan?
How Many Head pans Makes one wheel barrow?
What Does 1:2:4 Mean in Concrete?
How Many Head Pans Of Cement Makes 1 Bag?
How Do I Calculate The Volume Of A Beam, Foundation Or Slab?
Value In 1m^{3}

Value In Bags

Value In Head pan

Value In Wheel Barrows


Cement

0.22

6.2

12

3

Sand

0.29

N/A

16

4

Granite

0.57

N/A

32.8

8

Total

1

Nice work. I really appreciate your blog.. Thanks
Thanks for dropping by dear…
Brilliant. Again I say brilliant!
NO MATERIAL FACTOR?
Thanks for your work but it's not very accurate. Firstly, 1:2:4 when batching by head pans means 1 headpan of cement ( not bag) to 2 of sand to 2 of granite. Secondly, you did not consider the fact that a portion of the mix of sand, cement and water will fill up voids in the granite. Meaning that you'll need more of the cement and sand to obtain the desired volume
So what's the correct one sir…
You just contradicted yourself
You said its "1 headpan of cement to 2 of sand to 2 of granite"
Now tell me if you're correct
Nice work man really appreciate it.
Great work man. Thanks.
Good effort, appreciated.
Nice…. So ease to understand
In fact I was expecting that contradictor to mention the factor of safety that was left out for the wet concrete which is 1.54 to 1.57. that means: 1/7*1m3*1.54 =0.22m3 instead of 0.14
Then that volume of 0.22m3*1440kg density of cement gives 316.8kg/50kg gives 6 bags of cement.
it was a mistake my dear. i have effected the change now
1:2:4 is a rough ratio of volumes or weight, but don't mix it up as the Density of each are different.
ASSUME:Concrete Density is 2400kg/m3 and a head pan is 25kg max carrying weight.
A ratio of 1:2:4 gives 7 parts.
Cement is 1 part therefore 1/7 of 2400 = 342kg = 6.8 x 50kg bags.
Sand is 2 parts, therefore 2/7 of 2400 = 684kg. (27 head pans)
Stone is 4 parts, therefore 4/7 of 2400 = 1368kg.(55 head pans)
THIS IS ALL TO MAKE 1 meter cube of CONCRETE.
Good arithmetic.
Thanks for reading
Pls how did we arrived at this wet concrete value 1.57 pls some one should help me as a beginner.thanks
There is no 1.57 anywhere on this post sir
Good job
Well done for good job, I think this person means the 1.54 I also was not clear with where you multiplied 1/7*1.54 sir
1/7 means 1 portion of cement divided by total portion of mix (1:2:4=7)
1.54 means 1 c.m of concrete + 34%bulkage &20% wastage(total 0.54)
I hope this helps regards
Enter your comment…Great job
Using the ration 1:2:4 If 1 bag of cement is 2 head pans,it means that 1 bag of cement will be for 4 head pans and 8 head pans of gravel,therefore for 6bag of cement will require 24 head pan I.e 6 wheelbarrow,nd 48 head pan for gravel I.e 12 wheel barrow
Nice one
Unknown of 2 March 2021 has explained it all. Thanks to all of you guys. Including DavQs. Nice job.
Do wastage and bulkage apply cement alone?
I think for 6 bags of cement, you'd have to multiply it by 2 getting 12 headpans and not 24.kindly check your calculation well
please how did you arrive at 1.54?
This is a great, thanks amply